Description
Right To Bear 16″ Government Profile .223 Wylde Barrel RTB Complete M16 Bolt Carrier Group – Polished Black Nitride
Barrel Info:
This 223 Wyldechambered 16″ GovernmentProfile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.
Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels. Unlike chrome lining, where the chrome is built up on the surface, QPQ converts the surface without the risk of dimensional build up. The technique is used when two or more of the following properties are required in a work piece.
.223 Wylde chambers are designed to safely fire both .223 Remington and 5.56 NATO ammunition. This is important because 5.56 NATO rounds generate higher pressures than .223 Remington, and firing 5.56 in a rifle chambered for .223 Remington can be dangerous. Also, .223 Wylde chambers are often more accurate than standard 5.56 NATO chambers, particularly with .223 Remington ammunition. This is due to the tighter tolerances in the chamber, which helps to better align the bullet with the bore.
| Barrel | Specifications |
|---|---|
| Caliber | .223 Wylde |
| Length | 16″ |
| Material | 4150 Chrome Moly Vanadium |
| Profile | Government |
| Finish | QPQ Corrosion Resistant |
| Gas System Length | Mid-length |
| Gas Block Journal | .750″ |
| Dimpled? | Yes |
| Twist Rate | 1:7 |
| Muzzle Thread | 1/2×28 TPI |
| Weight | 27.2oz |
| Barrel Extension | M4 Feed Ramps |
| Target Crown | 11 Degree |
Complete BCGInfo:
Our Nitrided M16 BCG is micro polished before and after the Melonite process, producing a beautiful finish and an extremely slick surface. The carrier is made from 8620 steel. The bolt is made from 9310 steel and is MPI Tested and engraved. The 223 Bolt and Bolt Carrier Assembly is compatible with 5.56 and 300 Blackout.
- Enhanced 9310 Steel (Bolt)
- 8620 Tool Steel (Carrier)
- Mil-Spec Extractor Spring, black extractor insert, Viton O-Ring
- Tool Steel Extractor
- Shrouded Firing Pin
- Mil-Spec Gas Key (4130 Steel) attached with Grade 8 hardware and Properly staked
- Caliber: .223 / 5.56 / 300 Blackout
- Bolt is shot Peened and MPI
- All BCG components pre polished before being processed and then post polished for an incredible shine
