Description
Ballistic Advantage 12.3″ 5.56 Hanson Carbine Barrel w/ Lo Pro, Performance Series FREE KAK FLASH CAN
Barrel Info:
This 5.56 chambered 12.3 inch Performance Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. Our Performance Series Barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension. Comes with a pinned low pro gas block.
| Barrel | Specifications |
|---|---|
| Caliber | 5.56 |
| Length | 12.3″ |
| Material | 4150 Chrome Moly Vanadium |
| Profile | Hanson |
| Finish | QPQ Corrosion Resistant |
| Gas System Length | Carbine |
| Gas Block Journal | 1.03″ Gas Block Seat for .750″ Low Profile Gas Blocks Only |
| Dimpled? | No |
| Twist Rate | 1:7 |
| Muzzle Thread | 1/2×28 TPI |
| Weight | 22oz |
“BA Hanson Series Barrels provide a lightweight feel without lightweight limitations. Every barrel in the BA Hanson Series was designed specifically to its length and caliber to yield the best results with every aspect taken into consideration. It is truly ideal for how the AR was meant to perform. With the BA Hanson Profile, we found a more efficient way to harness a bullets energy while limiting felt recoil considerably. The balanced feel and overall performance of a Hanson barrel will create a more organic relationship between you and your rifle. It will simply be an extension of you!” – Clint Hanson
Muzzle Device Info:
In need of a linear compensator to direct blast, noise and gases down range? The Slim Line flash can from KAK Industries is a great option. This particular model is perfect for 5.56, .223 or 22LR pistol, rifle or SBR builds, and it can be used on .22LR rifles or rimfire caliber rifles shooting 9mm or smaller. Following the KX5 diameter, this flash can will fit under most handguards and rails. Keep in mind that it does not use a crush washer so it should be torqued directly against the barrel shoulder. Its specs are as follows:
- 1.2″ diameter
- 3.25″ long
- 6061 aluminum
- Black hard anodized finish
- 3.5 oz.
- 3/4″ wrench flats
- Threaded 1/2×28 for 9mm or smaller
All NFA/ATF Rules Apply
Depending on your state and local laws, you could use this barrel with a lower receiver that is a Registered SBR, or Pistol. Possession of this barrel along with a Non-NFA lower receiver may be Prohibited. We are not lawyers and the above information is not legal advise. Make sure you understand the most up to date federal, state and local laws before proceeding with this product.
